Type E Balanced Seal
Roten Type E is a balanced seal for high pressure fluid and is manufactured in the same range of materials as Roten Type 2. Version E4 is supplied wuth PTFE gaskets. Version E5 allows to replace the wearing faces during overhauls, this being its main characteristic. We recommend to consult our techincal department for any application of balanced seals.
Type RF
A metal bellow type seal suitable for very high or very low temperatures and other applications where elastomer or PTFE gaskets could cause problems.
Type EVS
The EVS seal is different from EHS in that it has a cylindrical spring, which is not in contact with the pumped medium. It is balanced and BIDIRECTIONAL, suitable for high-pressure uses and with dirty or viscous liquids. It is also very easy to clean by washing, which makes it particularly advantageous for use in food, sanitary and pharmaceutical application.
Roten S Indusgia
RotenS Indusgia - inoxpa mechanical seal
(Special Version
Pac-Seal Type 21 Sevete Duty Seal
Type 21, all purpose seal which rotates with the shaft against a stationary mating face.
The Pac Seal Type 21 features a unique design, the crimped head and hex-torque drive system, to provide superior performance and make it the non-generic choice.
Flowserve Pac-Seal
O-Ring, Quad Ring, PTFE Backup Ring, Hydraulic Seal & Gland Packings
Mechanical Shaft Seal
Mechanical Shaft Seals
Self Adhesive Seal
100%. PTFE joint sealant. Self - adhesive gasket. The universally self - adhesive seal for flanges covers & lids.
Gland Packing
For pump, valves, rods, plungers & rams.
Teflon Bellow Seal
Seal is resistant to a wide variety of chemicals including strong oxidizing acids, reducing agents, alkaline liquids, salts and high-acid concentrates.
ED-560 Seal
Type ED560, compact design, using two machanical seals of the EA560.
Compared with normal tandem seals, the type ED560 is a compact design, using two mechanical seals of the type ED560. Since the configuration prevents fluid with suspended solids from coming in contact with the spring side, its component are not subject to abrasive wear.
H-Series
Balance and inbalance type
This series is a typical mechanical seal fro process pumps. It is similar to the L-series, and can be applied to high viscosity fluids and slurries. Shape and materials of the stationary rings are the same as that of the L-series. It is widely used as a standard mechanical seal and the records indicate substantial balanced and unbalanced available.
